Last Updated on Sunday, 4 April 2010 06:32 Written by admin Saturday, 6 February 2010 09:46

Description:
Here’s a BW I made recently. It hasn’t been entered in competition because I think it’s still too young, but friends who tasted it think it’s pretty good. This is my third or fourth try at this style with this basic method. I haven’t decided yet whether I like this one better than the previous effort, but it’s close, anyway.

Final result has medium-low carbonation and a complex malt-hops nose. The malty sweetness is balanced by the agressive hopping level, and high hop flavor.

You could probably pump up the gravity of this another 8-10 points (and thus the alcohol by another 1% or so) by adding a pound of sugar, with no deleterious flavor effects.
Ingredients:

* 10lbs DWC(DeWolf-Cosyns Belgian) Pilsener malt
* 8 lbs DWC Pale malt
* 1.5lbs DWC CaraVienne malt
* 0.1lbs Roasted Barley
* 0.5lbs DWC (Belgian) Munich malt
* 2 oz Northern Brewer pellets (9%) 60 min
* 1 oz BC Kent Goldings plugs (5%) 30 min
* 1/2oz BC Kent Goldings plug (5%) 15 min
* 1/2oz BC Kent Goldings plug (5%) 5 min
* 1/2oz Fuggles plug (4.3%) 5 min
* London ale yeast

Procedure:
Mash schedule:
Mash-in with 10qts @ 42C for a strike temp of 39C
20 minute beta-glucan rest
Add 10 qts at 100C (boiling) to raise to 62C (aiming for 60C),
30 min. beta-amylase rest
Add 6 quarts @ 100C to raise to 67C (aiming for 70C)
1:15 alpha-amylase rest

Take first runnings (drain all liquid from mash tun without adding any further sparge water(*)) to get about 4-4.5 gallons @ 1.080. Boiling down to 3 gallons will give an OG of 1.105 – 1.120.

Whirlpool, let settle for 15 minutes and siphon through counterflow chiller with aerating cane on end.

Pitch yeast slurry from a previous batch of Mild (probably YeastLab London Ale (it’s a long story)). (By the way, this is my favorite way to pitch *enough* yeast for a barleywine.) Fermentation was active in 2 hours. Primary was about 2 months @ 65-70F, and dropped from 1.105 to 1.038.

Rack into secondary and add 1 oz of EKG plugs for dry hopping.

Bottle about 1 month later. Added new yeast, but no priming sugar.

(*) You can (I did) add more hot water to the remaining mash, and sparge out about 7 gallons more wort to make a Bitter at about 1.045.

Last Updated on Sunday, 4 April 2010 06:32 Written by admin Saturday, 6 February 2010 09:43

Description:
I made a batch of this about a year ago and it was so good that I’ve got two batches of it running in tandem. This has a nice balanced flavor.

Ingredients:

* 12 pounds, dry pale malt extract
* 1/2 pound, honey
* 1 pound, dry light malt extract
* 1-1/2 pounds, corn sugar
* 2 ounces, Chinook boiling hops (13.2 alpha)
* 2 ounces, Cascade boiling hops (5.5 alpha)
* 2 tsp., Irish moss
* 2 ounces, Fuggles hops (finish)
* 2 tsp., Sparkeloid
* champagne yeast

Primary Ferment: 7 months
Procedure:

Boil malt, boiling hops, and corn sugar in 1-1/2 gallons water for about 1 hour. In last 30 minutes add Irish moss, Fuggles, and sparkeloid. Add to 3-1/2 gallons cold water in fermenter. Pitch yeast and ferment about 7 months. Bottle and age.